H2 Transport Refueler

26 kg in 10 min at 700 barA complete hydrogen fueling station on wheels

731 kg of onboard hydrogen, 1,000 bar compression, and dual-pressure dispensing at 350 and 700 bar. Park it where the fleet is.

The station comes to the fleet

Fueling infrastructure without the construction project.

The HZero is a relocatable, plug-and-play fueling station in ISO dimensions, factory tested and certified before it ships.

Its compressor and chiller run on integrated hydrogen fuel cells, so the entire fueling operation is carbon-free, from the gas in the tanks to the power that moves it.

731 kg

Onboard hydrogen

26 kg

Dispensed in 10 minutes

350 / 700

Bar, dual dispensers

1,000 bar

Onboard compressor

Rendering of the H2 Transport Refueler: a white Renewable Innovations truck and trailer
The number fleet operators ask first

26 kg in 10 minutes.

A heavy fuel-cell truck takes on a full 700 bar fill in the time a driver spends on a coffee stop. Run one, or drag through it.

Fill complete
0bar
0.0 of 26 kg0:00 min

Onboard hydrogen

After this fill731 kg
Full 26 kg fills from one load28

Endpoints are the published figures: 26 kg dispensed at 700 bar in 10 minutes. The pressure curve and the bank sequence between them are illustrative.

Dwell time decides

Vehicle dwell time, not fuel chemistry, decides whether a fleet can switch.

26kgat700barin10min

And with 731 kg onboard, the HZero keeps that pace vehicle after vehicle. The large holding capacity allows for many refills before a resupply is needed.

Inside the fill

Cascade filling, powered by hydrogen itself.

Fast fills come from staging pressure ahead of demand, not from working the compressor harder while a truck waits.

01

Fuel cells power the plant

Integrated hydrogen fuel cells run the onboard compression and chilling. No grid connection, no diesel auxiliary, fully carbon-free operation.

02

Compress to 1,000 bar

The onboard compressor takes stored hydrogen to 1,000 bar, with a 60 kW chiller managing gas temperature through compression and dispensing.

03

Stage in cascade tanks

High-pressure staging tanks hold gas above vehicle fill pressure, so each fill is driven by pressure differential: the mechanism behind the 10-minute fill.

04

Dispense at 350 or 700 bar

Dual-pressure dispensers cover the whole fleet: 350 bar for buses and machinery, 700 bar for heavy trucks and light FCEVs, from the same unit.

Datasheet

Full specifications

Tell us your vehicles, routes and daily hydrogen demand, and we will plan the dispensing schedule and the resupply cadence around them.

Plan a fueling operation

Capacity and compression
Onboard hydrogen731 kg
Compressor1,000 bar
Chiller60 kW
Filling methodCascade filling via high-pressure staging tanks
Dispensing
DispensersDual-pressure, 350 and 700 bar
Fill rate26 kg at 700 bar in 10 minutes
Flow rate32 g/second
Power
Compression and chillingPowered by integrated hydrogen fuel cells
OperationFully carbon-free
Physical and operations
Form factorISO dimensions; relocatable, plug-and-play
CommissioningFactory tested and certified
MonitoringOnline monitoring and control
Thermal and ventilationForced-air compartment ventilation; liquid-cooling radiators
EnvironmentRobust design for rugged weather conditions
Where it works

One refueler, four duties.

FleetsFCEV fleet refueling

Trucks, buses and hydrogen-powered machinery fuel at the depot instead of routing to fixed stations. Dual 350 and 700 bar dispensing serves mixed fleets from a single unit.

Supply tanksStationary and mobile tank refilling

The recommended replenishment method for remote hydrogen stores. It tops up the tanks feeding stationary fuel-cell power systems and mobile generators alike.

LogisticsVirtual Pipeline supply

Works as the dispensing end of RI's Virtual Pipeline operations, moving high-pressure hydrogen to the point of use where no pipeline or station exists.

CorridorsHeavy transport routes

Positioned along a freight corridor, it puts 700 bar heavy-truck fueling on routes years ahead of permanent station construction, then relocates when the permanent station opens.

After delivery

Factory tested, watched in the field.

Every HZero is tested and certified before it ships, then stays connected through online monitoring and control: hydrogen inventory, pressures and dispensing activity, visible to us and to you.

The hardware is built for the places fleets actually run: forced-air compartment ventilation, liquid-cooling radiators, and a robust design rated for rugged weather.

Aerial at dusk of a Rebelle Rally desert base camp running on Renewable Innovations power
2021 – 2025

Five rally seasons

The same crews have kept RI hydrogen systems running as official power partner of the Rebelle Rally for five consecutive years.

2,500 km

Grid-free route

Competitive off-road navigation across the Nevada and California desert, powered with no grid in reach.

2023

Diesel switched off

Base camps switched off diesel generators entirely, supporting 12 EVs over 8 competition days for 250+ people.

Fuel the fleet.

Tell us your vehicles, routes and daily hydrogen demand. We will plan the dispensing schedule and the resupply cadence, and quote the whole fueling operation: delivered, monitored and supported.